在CentOS上编译安装FFmpeg,一键安装脚本

在CentOS编译安装ffmpeg比较麻烦,以前也搞过多次,由于博客调整,特重新记录一下,以备不时之需。

使用yum安装ffmpeg和相关软件

快速安装 ffmpeg

直接安装:

1 
yum install ffmpeg ffmpeg-devel 

若没有找到相应包,需要先加入要应的包。

将下列代码命名为 dag.repo 放在 /etc/yum.repos.d 目录 下。

1 2 3 4 5 
[dag] name=Dag RPM Repository for Red Hat Enterprise Linux baseurl=http://apt.sw.be/redhat/el$releasever/en/$basearch/dag gpgcheck=1 enabled=1 

然后再执行上方的安装命令。

安装 ffmpeg-php 扩展

1 2 3 4 5 6 
wget /path/to/this/file/ffmpeg-php-0.5.2.1.tbz2 tar -xjf ffmpeg-0.5.2.1.tbz2 phpize ./configure make make install 

修改 php.ini 文件

安装完成后,将会在/usr/local/lib/php/extensions/no-debug-non-zts-20060613/ffmpeg.so 看到php扩展文件。

打开php.ini文件,加入下面两行

1 2 
[ffmpeg] extension=ffmpeg.so 

重启WEB服务器。使用phpinfo即可看到ffmpeg相关信息。

1 2 3 4 5 6 7 
// #test.php  <?php  phpinfo()  ?> 

php 使用方法

1 2 3 4 5 6 7 8 9 10 
<?php $extension = "ffmpeg"; $extension_soname = $extension . "." . PHP_SHLIB_SUFFIX; $extension_fullname = PHP_EXTENSION_DIR . "/" . $extension_soname;  // load extension if(!extension_loaded($extension)) {  dl($extension_soname) or die("Can't load extension $extension_fullname\n"); } ?> 

安装 Mplayer 和 Mencoder

1 
yum install mplayer mencoder 

常见问题

常见问题及解决方案请参考这里:http://www.mysql-apache-php.com/ffmpeg-install.htm

自行编译安装 ffmpeg

安装依赖项

1 
yum install autoconf automake gcc gcc-c++ git libtool make nasm pkgconfig zlib-devel 

安装相应软件包

可以建立目录存放软件包

1 
mkdir ~/ffmpeg_sources 

注意:以下软件包请有选择的安装,如果不需要请在./configure时移除或关闭相关选项

安装 yasm

Yasm是一个完全重写的NASM汇编。目前,它支持x86和AMD64指令集。 x264 和 FFmpeg都使用Yasm.

1 2 3 4 5 6 7 8 
cd ~/ffmpeg_sources git clone --depth 1 git://github.com/yasm/yasm.git cd yasm autoreconf -fiv ./configure --prefix="$HOME/ffmpeg_build" --bindir="$HOME/bin" make make install make distclean 

1 2 3 4 5 6 7 8 
wget http://www.tortall.net/projects/yasm/releases/yasm-1.3.0.tar.gz tar zxf yasm-1.3.0.tar.gz cd yasm-1.3.0 ./configure --prefix="$HOME/ffmpeg_build" --bindir="$HOME/bin" make make install make distclean . ~/.bash_profile 

安装 x264

H.264 编码器。http://trac.ffmpeg.org/wiki/Encode/H.264

1 2 3 4 5 6 7 
cd ~/ffmpeg_sources git clone --depth 1 git://git.videolan.org/x264 cd x264 ./configure --prefix="$HOME/ffmpeg_build" --bindir="$HOME/bin" --enable-static make make install make distclean 

1 2 3 4 5 6 7 
wget ftp://ftp.videolan.org/pub/x264/snapshots/last_x264.tar.bz2 tar jxf last_x264.tar.bz2 cd x264-snapshot-20130311-2245/ ./configure --prefix="$HOME/ffmpeg_build" --bindir="$HOME/bin" --enable-shared make make install make distclean 

需要ffmpeg配置./configure --enable-gpl --enable-libx264

注:由于libx264的code有GPL信息,所以,支持libx264时,需要—enable-gpl,ffmpeg在license方面还是比我们国内的人更重视

安装 x265

H.265/HEVC编码器.http://trac.ffmpeg.org/wiki/Encode/H.265

1 2 3 4 5 6 
cd ~/ffmpeg_sources hg clone https://bitbucket.org/multicoreware/x265 cd ~/ffmpeg_sources/x265/build/linux cmake -G "Unix Makefiles" -DCMAKE_INSTALL_PREFIX="$HOME/ffmpeg_build" -DENABLE_SHARED:bool=off ../../source make make install 

需要ffmpeg配置./configure --enable-gpl --enable-libx265

安装 libfdk_aac

AAC音频编码器,Fraunhofer AAC library

1 2 3 4 5 6 7 8 
cd ~/ffmpeg_sources git clone --depth 1 git://git.code.sf.net/p/opencore-amr/fdk-aac cd fdk-aac autoreconf -fiv ./configure --prefix="$HOME/ffmpeg_build" --enable-shared make make install make distclean 

需要ffmpeg配置--enable-libfdk_aac ,如果指定了--enable-gpl还要配置--enable-nonfree

安装 libmp3lame

Mp3音频编码器

1 2 3 4 5 6 7 
wget http://iweb.dl.sourceforge.net/project/lame/lame/3.99/lame-3.99.5.tar.gz tar zxf lame-3.99.5.tar.gz cd lame-3.99.5 ./configure --prefix="$HOME/ffmpeg_build" --bindir="$HOME/bin" --enable-shared --enable-nasm make make install make distclean 

需要ffmpeg配置--enable-libmp3lame

安装 libopus

Opus 音频编解码器

1 2 3 4 5 6 7 8 
cd ~/ffmpeg_sources git clone git://git.opus-codec.org/opus.git cd opus autoreconf -fiv ./configure --prefix="$HOME/ffmpeg_build" --disable-shared make make install make distclean 

1 2 3 4 5 6 7 
wget http://downloads.xiph.org/releases/opus/opus-1.0.3.tar.gz tar zxf opus-1.0.3.tar.gz cd opus-1.0.3 ./configure --prefix="$HOME/ffmpeg_build" --enable-shared make make install make distclean 

需要ffmpeg配置--enable-libopus

安装 libogg库

libogg是Ogg流库,libtheora、libvorbis需要libogg库,speex需要它。

1 2 3 4 5 6 7 8 
cd ~/ffmpeg_sources curl -O http://downloads.xiph.org/releases/ogg/libogg-1.3.2.tar.gz tar xzvf libogg-1.3.2.tar.gz cd libogg-1.3.2 ./configure --prefix="$HOME/ffmpeg_build" --disable-shared make make install make distclean 

安装 libvorbis库

Vorbis音频编码器,需要libogg库。http://trac.ffmpeg.org/wiki/CompilationGuide/Centos#libogg

1 2 3 4 5 6 7 8 
cd ~/ffmpeg_sources curl -O http://downloads.xiph.org/releases/vorbis/libvorbis-1.3.4.tar.gz tar xzvf libvorbis-1.3.4.tar.gz cd libvorbis-1.3.4 LDFLAGS="-L$HOME/ffmeg_build/lib" CPPFLAGS="-I$HOME/ffmpeg_build/include" ./configure --prefix="$HOME/ffmpeg_build" --with-ogg="$HOME/ffmpeg_build" --disable-shared make make install make distclean 

需要ffmpeg配置--enable-libvorbis

安装 libvpx

VP8/VP9视频编码器

1 2 3 4 5 6 7 
cd ~/ffmpeg_sources git clone --depth 1 http://git.chromium.org/webm/libvpx.git cd libvpx ./configure --prefix="$HOME/ffmpeg_build" --enable-examples make make install make clean 

需要ffmpeg配置--enable-libvpx

编译安装 ffmpeg

1 2 3 4 5 6 7 8 
cd ~/ffmpeg_sources git clone --depth 1 git://source.ffmpeg.org/ffmpeg cd ffmpeg PKG_CONFIG_PATH="$HOME/ffmpeg_build/lib/pkgconfig" ./configure --prefix="$HOME/ffmpeg_build" --extra-cflags="-I$HOME/ffmpeg_build/include" --extra-ldflags="-L$HOME/ffmpeg_build/lib" --bindir="$HOME/bin" --pkg-config-flags="--static" --enable-gpl --enable-nonfree --enable-libfdk_aac --enable-libfreetype --enable-libmp3lame --enable-libopus --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libx265 make make install make distclean hash -r 

注:

  • 编译完成后ffmpeg,ffprobe,ffserver,lame,x264都可以使用。
  • 编译安装时可以参考Windows Build:http://ffmpeg.zeranoe.com/builds/
  • 如果还需要持续更新请保留ffmpeg_sources目录。

其它可选软件包

安装 OpenCORE AMR

1 2 3 4 5 
wget http://iweb.dl.sourceforge.net/project/opencore-amr/opencore-amr/opencore-amr-0.1.3.tar.gz tar zxf opencore-amr-0.1.3.tar.gz ./configure --prefix="$HOME/ffmpeg_build" –enable-shared make make install 

需要ffmpeg配置--enable-libopencore-amrnb 和/或 --enable-libopencore-amrwb

安装 VisualOn AAC

注:github的tag和master版均无法autoconf,用zeranoe版代替

1 2 3 4 5 6 7 
wget wget http://ffmpeg.zeranoe.com/builds/source/external_libraries/vo-aacenc-0.1.3.tar.xz xz -d vo-aacenc-0.1.3.tar.xz tar xf vo-aacenc-0.1.3.tar cd vo-aacenc-0.1.3 ./configure --prefix="$HOME/ffmpeg_build"  make make install 

也可

1 
wget http://iweb.dl.sourceforge.net/project/opencore-amr/vo-aacenc/vo-aacenc-0.1.3.tar.gz 

需要ffmpeg配置--enable-libvo-aacenc

安装 VisualOn AMR-WB

注:github的tag和master版均无法autoconf,用zeranoe版代替

1 2 3 4 5 
wget http://ffmpeg.zeranoe.com/builds/source/external_libraries/vo-amrwbenc-0.1.2.tar.xz xz -d vo-amrwbenc-0.1.2.tar.xz tar xf vo-amrwbenc-0.1.2.tar cd vo-amrwbenc-0.1.2 ./configure --prefix="$HOME/ffmpeg_build" 

需要ffmpeg配置--enable-libvo-amrwbenc

安装 frei0r

先安装新版autoconf,这会覆盖掉系统中的旧版本哦

1 2 3 4 5 6 
wget http://ftp.gnu.org/gnu/autoconf/autoconf-2.69.tar.gz tar zxf autoconf-2.69.tar.gz cd autoconf-2.69 ./configure --prefix="$HOME/ffmpeg_build"  make make install 
1 2 3 4 5 6 
wget http://files.dyne.org/frei0r/releases/frei0r-plugins-1.4.tar.gz tar zxf frei0r-plugins-1.4.tar.gz cd frei0r-plugins-1.4 ./configure --prefix="$HOME/ffmpeg_build"  make make install 

安装 gnutls

注意:/etc/ld.so.conf要加上lib64。并且不要使用yum remove gnutls gnutls-devel

首先安装nettle:

1 2 3 4 5 6 
wget http://www.lysator.liu.se/~nisse/archive/nettle-2.5.tar.gz tar zxf nettle-2.5.tar.gz cd nettle-2.5 ./configure --prefix="$HOME/ffmpeg_build" –enable-shared make make install 

然后安装gnutls新版:

1 2 3 4 5 6 7 
wget ftp://ftp.gnutls.org/gcrypt/gnutls/v3.1/gnutls-3.1.9.1.tar.xz xz -d gnutls-3.1.9.1.tar.xz tar xf gnutls-3.1.9.1.tar cd gnutls-3.1.9.1 PKG_CONFIG_PATH=/usr/local/lib64/pkgconfig:/usr/lib64/pkgconfig:/usr/local/lib/pkgconfig:/usr/lib/pkgconfig ./configure –enable-shared make make install 

安装 rtmpdump

1 2 3 4 5 
wget http://rtmpdump.mplayerhq.hu/download/rtmpdump-2.3.tgz tar zxf rtmpdump-2.3.tgz cd rtmpdump-2.3 make make install 

安装 schroedinger

注:先安装好orc库

1 2 3 4 5 6 7 
wget http://code.entropywave.com/download/orc/orc-0.4.17.tar.gz tar zxf orc-0.4.17.tar.gz cd orc-0.4.17 ./configure --prefix="$HOME/ffmpeg_build"  make make install /sbin/ldconfig 
1 2 3 4 5 6 
wget http://diracvideo.org/download/schroedinger/schroedinger-1.0.11.tar.gz tar zxf schroedinger-1.0.11.tar.gz cd schroedinger-1.0.11 PKG_CONFIG_PATH=/usr/local/lib64/pkgconfig:/usr/lib64/pkgconfig:/usr/local/lib/pkgconfig:/usr/lib/pkgconfig ./configure make make install 

安装 soxr

注:新版libsoxr貌似与当前ffmpeg不兼容,用旧版

1 2 3 4 5 6 7 8 9 10 
yum install -y xz wget http://hivelocity.dl.sourceforge.net/project/soxr/soxr-0.1.0-Source.tar.xz xz -d soxr-0.1.0-Source.tar.xz tar xf soxr-0.1.0-Source.tar cd soxr-0.1.0-Source ./go cd Release/ make make install /sbin/ldconfig 

安装 speex

音频编码解码器。需要安装libogg库

1 
yum install speex-devel 

1 2 3 4 5 6 
wget http://downloads.xiph.org/releases/speex/speex-1.2rc1.tar.gz tar zxf speex-1.2rc1.tar.gz cd speex-1.2rc1 ./configure --prefix="$HOME/ffmpeg_build"  make make install 

ffmpeg ./configure 添加 --enable-libspeex

安装 libfreetype

字体呈现库,使用drawtext http://ffmpeg.org/ffmpeg-filters.html#drawtext-1

1 
yum install freetype-devel 

ffmpeg ./configure 添加 --enable-libfreetype

安装 libsdl库

1 2 3 4 5 6 7 
wget http://www.libsdl.org/release/SDL-1.2.15.tar.gz tar zxf SDL-1.2.15.tar.gz cd SDL-1.2.15 ./configure --prefix="$HOME/ffmpeg_build"  make make install /sbin/ldconfig 

安装 theora

Theora视频编码器,需要需要libogg,libvorbis和libsdl库

1 2 3 4 5 6 
wget http://downloads.xiph.org/releases/theora/libtheora-1.1.1.tar.bz2 tar zjf libtheora-1.1.1.tar.bz2 ./configure --prefix="$HOME/ffmpeg_build" --with-ogg="$HOME/ffmpeg_build" --disable-examples --enable-shared --disable-sdltest --disable-vorbistest make make install make distclean 

ffmpeg ./configure 添加 --enable-libtheora

安装 twolame

1 2 3 4 5 6 7 8 
wget http://downloads.sourceforge.net/twolame/twolame-0.3.13.tar.gz tar zxf twolame-0.3.13 .tar.gz cd twolame-0.3.13 ./configure --prefix="$HOME/ffmpeg_build"  make make install /sbin/ldconfig 

安装 xvid

1 2 3 4 5 6 7 
wget http://downloads.xvid.org/downloads/xvidcore-1.3.2.tar.gz tar zxf xvidcore-1.3.2.tar.gz cd xvidcore cd build/generic ./configure --prefix="$HOME/ffmpeg_build"  make make install 

更新FFmpeg及相关组件

更新依赖项

删除旧文件,更新依赖项

1 2 
rm -rf ~/ffmpeg_build ~/bin/{ffmpeg,ffprobe,ffserver,lame,vsyasm,x264,yasm,ytasm} # yum install autoconf automake cmake gcc gcc-c++ git libtool make mercurial nasm pkgconfig zlib-devel 

更新 x264

1 2 3 
cd ~/ffmpeg_sources/x264 make distclean git pull 

然后运行

1 2 3 4 
./configure --prefix="$HOME/ffmpeg_build" --bindir="$HOME/bin" --enable-static make make install make distclean 

更新 x265

1 2 3 4 
cd ~/ffmpeg_sources/x265 rm -rf ~/ffmpeg_sources/x265/build/linux/* hg update cd ~/ffmpeg_sources/x265/build/linux 

然后运行

1 2 3 
cmake -G "Unix Makefiles" -DCMAKE_INSTALL_PREFIX="$HOME/ffmpeg_build" -DENABLE_SHARED:bool=off ../../source make make install 

更新 libfdk_aac

1 2 3 
cd ~/ffmpeg_sources/libfdk_aac make distclean git pull 

然后运行

1 2 3 4 5 6 
cd fdk-aac autoreconf -fiv ./configure --prefix="$HOME/ffmpeg_build" --disable-shared make make install make distclean 

更新 libvpx

1 2 3 
cd ~/ffmpeg_sources/libvpx make clean git pull 

然后运行

1 2 3 4 5 
cd libvpx ./configure --prefix="$HOME/ffmpeg_build" --disable-examples make make install make clean 

更新FFmpeg

1 2 3 
cd ~/ffmpeg_sources/ffmpeg make distclean git pull 

然后运行

1 2 3 4 5 6 
cd ffmpeg PKG_CONFIG_PATH="$HOME/ffmpeg_build/lib/pkgconfig" ./configure --prefix="$HOME/ffmpeg_build" --extra-cflags="-I$HOME/ffmpeg_build/include" --extra-ldflags="-L$HOME/ffmpeg_build/lib" --bindir="$HOME/bin" --pkg-config-flags="--static" --enable-gpl --enable-nonfree --enable-libfdk_aac --enable-libfreetype --enable-libmp3lame --enable-libopus --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libx265 make make install make distclean hash -r 

还原所有本文安装内容

1 2 3 
rm -rf ~/ffmpeg_build ~/ffmpeg_sources ~/bin/{ffmpeg,ffprobe,ffserver,lame,vsyasm,x264,yasm,ytasm} # yum erase autoconf automake cmake gcc gcc-c++ git libtool mercurial nasm pkgconfig zlib-devel hash -r 

注:如安装其它软件包需要自行删除

自动安装shell

https://gist.github.com/gboudreau/f24aed76b4cc91bfb2c1

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 
#!/bin/sh   # Based on instructions found here: http://wiki.razuna.com/display/ecp/FFMpeg+Installation+on+CentOS+and+RedHat#FFMpegInstallationonCentOSandRedHat-InstallX264   if [ "`/usr/bin/whoami`" != "root" ]; then  echo "You need to execute this script as root."  exit 1 fi   cat > /etc/yum.repos.d/centos.repo<<EOF [centos] name=CentOS-6 – Base baseurl=http://mirror.centos.org/centos/6/os/x86_64/ gpgcheck=1 gpgkey=http://mirror.centos.org/centos/RPM-GPG-KEY-CentOS-6 enabled=1 priority=1 protect=1 includepkgs=SDL SDL-devel gsm gsm-devel libtheora theora-tools libdc1394 libdc1394-devel libraw1394-devel EOF rpm --import http://mirror.centos.org/centos/RPM-GPG-KEY-CentOS-6   rpm -Uhv http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.3-1.el6.rf.x86_64.rpm yum -y update   yum -y install glibc gcc gcc-c++ autoconf automake libtool git make nasm pkgconfig yum -y install SDL-devel a52dec a52dec-devel alsa-lib-devel faac faac-devel faad2 faad2-devel yum -y install freetype-devel giflib gsm gsm-devel imlib2 imlib2-devel lame lame-devel libICE-devel libSM-devel libX11-devel yum -y install libXau-devel libXdmcp-devel libXext-devel libXrandr-devel libXrender-devel libXt-devel yum -y install libogg libvorbis vorbis-tools mesa-libGL-devel mesa-libGLU-devel xorg-x11-proto-devel zlib-devel yum -y install libtheora theora-tools yum -y install ncurses-devel yum -y install libdc1394 libdc1394-devel yum -y install amrnb-devel amrwb-devel opencore-amr-devel   cd /opt wget http://downloads.xvid.org/downloads/xvidcore-1.3.2.tar.gz tar xzvf xvidcore-1.3.2.tar.gz && rm -f xvidcore-1.3.2.tar.gz cd xvidcore/build/generic ./configure --prefix="$HOME/ffmpeg_build" && make && make install   cd /opt wget http://downloads.xiph.org/releases/ogg/libogg-1.3.1.tar.gz tar xzvf libogg-1.3.1.tar.gz && rm -f libogg-1.3.1.tar.gz cd libogg-1.3.1 ./configure --prefix="$HOME/ffmpeg_build" --disable-shared && make && make install   cd /opt wget http://downloads.xiph.org/releases/vorbis/libvorbis-1.3.4.tar.gz tar xzvf libvorbis-1.3.4.tar.gz && rm -f libvorbis-1.3.4.tar.gz cd libvorbis-1.3.4 ./configure --prefix="$HOME/ffmpeg_build" --with-ogg="$HOME/ffmpeg_build" --disable-shared && make && make install   cd /opt wget http://downloads.xiph.org/releases/theora/libtheora-1.1.1.tar.gz tar xzvf libtheora-1.1.1.tar.gz && rm -f libtheora-1.1.1.tar.gz cd libtheora-1.1.1 ./configure --prefix="$HOME/ffmpeg_build" --with-ogg="$HOME/ffmpeg_build" --disable-examples --disable-shared --disable-sdltest --disable-vorbistest && make && make install   cd /opt wget http://downloads.sourceforge.net/opencore-amr/vo-aacenc-0.1.2.tar.gz tar xzvf vo-aacenc-0.1.2.tar.gz && rm -f vo-aacenc-0.1.2.tar.gz cd vo-aacenc-0.1.2 ./configure --prefix="$HOME/ffmpeg_build" --disable-shared && make install   yum -y remove yasm cd /opt wget http://www.tortall.net/projects/yasm/releases/yasm-1.2.0.tar.gz tar xzfv yasm-1.2.0.tar.gz && rm -f yasm-1.2.0.tar.gz cd yasm-1.2.0 ./configure --prefix="$HOME/ffmpeg_build" --bindir="$HOME/bin" && make install export "PATH=$PATH:$HOME/bin"    cd /opt git clone http://git.chromium.org/webm/libvpx.git cd libvpx git checkout tags/v1.3.0 ./configure --prefix="$HOME/ffmpeg_build" --disable-examples && make && make install   cd /opt git clone git://git.videolan.org/x264.git cd x264 ./configure --prefix="$HOME/ffmpeg_build" --bindir="$HOME/bin" --enable-static && make install   export LD_LIBRARY_PATH=/usr/local/lib/:$HOME/ffmpeg_build/lib/ echo /usr/local/lib >> /etc/ld.so.conf.d/custom-libs.conf echo $HOME/ffmpeg_build/lib/ >> /etc/ld.so.conf.d/custom-libs.conf ldconfig   cd /opt git clone git://source.ffmpeg.org/ffmpeg.git cd ffmpeg git checkout release/2.2 PKG_CONFIG_PATH="$HOME/ffmpeg_build/lib/pkgconfig" export PKG_CONFIG_PATH ./configure --prefix="$HOME/ffmpeg_build" --extra-cflags="-I$HOME/ffmpeg_build/include" --extra-ldflags="-L$HOME/ffmpeg_build/lib" --bindir="$HOME/bin" \ --extra-libs=-ldl --enable-version3 --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libvpx --enable-libfaac \ --enable-libmp3lame --enable-libtheora --enable-libvorbis --enable-libx264 --enable-libvo-aacenc --enable-libxvid --disable-ffplay \ --enable-gpl --enable-postproc --enable-nonfree --enable-avfilter --enable-pthreads --arch=x86_64 && make install   # Test the resulting ffmpeg binary cp $HOME/bin/ffmpeg /usr/bin/ ffmpeg -v 

参考

原文:http://www.yaosansi.com/post/ffmpeg-on-centos

在CentOS上编译安装FFmpeg,一键安装脚本》有1个想法

评论已关闭。